Monday, June 23, 2008

Frame-relay Fragmentation

R4 --- FR CLOUD --- R6

Both ends configured:

R6(config)#int s1/1
R6(config-if)#frame-relay fragment 200 end-to-end
R6(config-if)#^Z

R6#ping 172.14.45.4 size 8000

Type escape sequence to abort.
Sending 5, 8000-byte ICMP Echos to 172.14.45.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 676/756/796 ms

R6#show frame-relay fragment
interface dlci frag-type size in-frag out-frag dropped-frag
Se1/1 604 end-to-end 200 220 220 0
Se1/1 605 end-to-end 200 0 0 0

2 comments:

  1. Hello,

    I've been reading your blog for some time now and wanted to discuss a couple of things with you regarding it. If you could, please email me at your convenience, it would be appreciated. Thank you!!!

    Mike

    ReplyDelete
  2. It is something in Cisco that I don't really understand so much.
    I am not really good in networking. Can you put some definitions of keywords when you write a blog. Thank you!

    Atria from chapeau de cheminĂ©e 

    ReplyDelete

Note: Only a member of this blog may post a comment.